View SF161_4773477.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GLASS PASSIVATED SUPER FAST RECTIFIER
VOLTAGE RANGE 50 to 200 Volts CURRENT 16 Ampere
FEATURES
* * * * * * * * * * * *
SF161 THRU SF164
Low switching noise Low forward voltage drop Low thermal resistance High current capability Super fast switching speed High reliability Good for switching mode circuit Case: TO-220A molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.24 grams
.108 ( 2.75) .413 ( 10.5) .374 ( 9.5) .153 ( 3.9) .146 ( 3.7)
TO-220A
.187 ( 4.7) .148 ( 3.8) .053 ( 1.3) .270 ( 6.9) .230 ( 5.8) .610 ( 15.5) .583 ( 14.8) .04MAX. ( 1.0) .047 ( 1.2)
MECHANICAL DATA
1
PIN
2
.157 ( 4.0)
.051 ( 1.3)
.583 ( 14.8) .531 ( 13.5)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
.035 (0.9) .028 ( 0.7) .102 ( 2.6) .091 ( 2.3)
PIN 1 PIN 2
.020 ( 0.5) .012 ( 0.3) .126 (3.2)
HEATSINK
Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T C = 100 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 4) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range
O
SYMBOL VRRM VRMS VDC IO I FSM R q JA R q JC CJ T J, T STG
SF161 50 35 50
SF162 100 70 100 16.0 250 16 1.2 175 -55 to + 150
SF163 150 105 150
SF164 200 140 200
UNITS Volts Volts Volts Amps Amps
0
C/ W pF
0
C
ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 16.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C SYMBOL VF IR trr SF161 SF162 0.975 10 500 35 SF163 SF164 UNITS Volts mAmps nSec 2006-11
Maximum Reverse Recovery Time (Note 1)
NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. Suffix "R" for Reverse Polarity. 4. Typical Thermal Resistance from junction to ambient and from junction to case on heat-sink mounted. 5. "Fully ROHS complaint", "100% Sn plating (Pb-free)"
RATING AND CHARACTERISTICS CURVES ( SF161 THRU SF164 )
INSTANTANEOUS FORWARD CURRENT, (A)
20 AVERAGE FORWARD CURRENT, (A) 16 12 8 4 0
Single Phase Half Wave 60 Hz Inductive or Resistive Load
50 30 20 14 12 10 4 2 1.0 0.6 0.8 1.0 1.2
TA = 25 OC Pulse Width = 300mS 1% Duty Cycle
0
50
100
O
150
1.4
1.6
1.8
2.0
CASE TEMPERATURE, ( C)
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (mA)
1000
FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE
TA = 100 OC
1000 CT, JUNCTION CAPACITANCE, (pF)
FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
100
10
100
1.0
TA = 25 OC
0.1
0
20
40
60
80
100
120
140
10 0.1 0.2
TJ = 25 OC
0.4
1.0
2
4
10
20
40
100
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
REVERSE VOLTAGE, (V)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
PEAK FORWARD SURGE CURRENT, (A)
FIG.4 TYPICAL JUNCTION CAPACITANCE
300 250 200 150 100 50 0 1 2 5
8.3mS Single Half Sine-Wave JEDEC Method
10
20
50
100
NUMBER OF CYCLES AT 60Hz
FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.

▲Up To Search▲

Price & Availability of SF161

	To Download SF161 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .